Pool Renovations • Tile and Coping • Decks and Patios | Call 512-264-1979
Pool Resurfacing San Antonio

Pool Resurfacing in San Antonio, TX

Complete Interior Resurfacing — From Budget White Plaster to 20-Year Pebble Aggregate. Certified Applicators. San Antonio Hard Water Protocols.

Pool Resurfacing San Antonio — Complete Interior Restoration

Pool Resurfacing San Antonio TX by H&H Tile and Plaster

Pool resurfacing is the complete removal and replacement of the interior pool finish — the solution when the existing surface has deteriorated beyond the point where repairs are practical or cost-effective. H&H Tile & Plaster offers the full range of resurfacing options for San Antonio homeowners, from budget-conscious standard plaster to premium pebble aggregate systems that last 20+ years in our demanding hard water environment.

The single most important factor in resurfacing longevity is shell preparation, not finish selection. Proper chipping of the existing surface, acid washing to remove mineral contamination, structural crack repair before any new material is applied, and correct bond coat application — these preparation steps determine whether your new finish lasts its full intended life or fails early. H&H never shortcuts the prep phase, because that’s where longevity is won or lost.

San Antonio’s hard water environment makes finish selection and startup chemistry especially critical. We will walk you through all options at your free estimate appointment and give you an honest recommendation based on your pool’s specific condition, your water chemistry habits, and how long you plan to keep the pool — not just what generates the highest ticket.

✓ Full Prep Before Any Finish

Chipping, acid washing, crack repair, and bond coat. No shortcuts on prep because that determines finish longevity.

✓ All Finish Options Available

White plaster, colored plaster, quartz aggregate (Diamond Brite), Pebble Tec, and Pebble Sheen.

✓ Certified for Premium Finishes

Manufacturer-certified application for Pebble Tec, Pebble Sheen, and Diamond Brite. Warranties available.

✓ Hard Water Startup Included

28-day startup guidance calibrated for the Edwards Aquifer. Proper startup is critical to finish longevity.

Get a Free Estimate

Start Your San Antonio Pool Project

Certified applicators. Premium finishes. Lasting results.

Phone 512-264-1979
Address 31866 Ranch Rd 12, Dripping Springs, TX 78620
Hours Mon–Fri 8:00 AM – 5:00 PM
Get a Free Estimate
10,000+Pools Completed
30+Years Combined Experience
4.9★Google Reviews
2004Serving Texas Since

Pool Resurfacing Options for San Antonio Homeowners

Each finish option has different performance characteristics in San Antonio’s hard water environment. Here’s what you need to know.

Signs Your Pool Needs Resurfacing

Pool surfaces don’t need to be dramatically damaged to warrant resurfacing. The warning signs that indicate it’s time include: rough surface texture that scratches feet and harbors algae; visible pitting across large areas (not just isolated spots); staining that no longer responds to acid washing; delamination where plaster separates from the shell; structural cracking that has progressed beyond minor hairlines; and age alone — standard plaster past 10 years in San Antonio has likely exceeded its service life even without obvious visible damage.

San Antonio Resurfacing Timeline by Finish

FinishLifespan in SARelative CostBest Application
White Plaster7–12 years$Budget-conscious; short-term ownership
Quartz Aggregate12–18 years$$Best value; 10+ year ownership plans
Pebble Tec/Sheen20+ years$$$Maximum durability; permanent or long-term

What Our Resurfacing Process Looks Like

We drain your pool and chip the existing surface to ensure proper adhesion of the new finish — we never apply new plaster over old. After chipping, the shell is thoroughly acid washed to remove mineral deposits and surface contamination. Any structural cracks are repaired with appropriate hydraulic cement or epoxy systems before the new finish is applied. The bond coat is applied and inspected before your chosen finish is troweled on by our certified crews to manufacturer specifications. After filling, we provide detailed startup chemistry guidance for San Antonio’s hard water conditions.

Pool resurfacing process San Antonio TX shell prep and finish application

How H&H Handles Every San Antonio Pool Project

A consistent, proven process — from first call to final startup.

1

Free On-Site Estimate

We visit your pool, assess all surface conditions — plaster, tile, coping, shell structure — and listen to your goals. You get a detailed, no-obligation estimate and honest recommendations.

2

Project Planning & Scheduling

We schedule your project, confirm finish selections, and coordinate all trades. For full renovations, we sequence work to minimize downtime and eliminate gaps between crews.

3

Preparation & Application

Proper shell prep — draining, chipping, acid washing, structural crack repair, bond coat — before any finish is applied. Certified crews apply your finish to manufacturer specifications.

4

Startup & Handoff

We fill your pool and provide San Antonio-specific startup chemistry guidance calibrated for the Edwards Aquifer’s hard water. The 28-day startup period is critical — we make sure you understand exactly what to do.

What San Antonio Pool Owners Say About H&H

Real reviews from real homeowners across Bexar County and the Hill Country.

★★★★★

“H&H replastered our pool and replaced all the waterline tile. The crew was professional, the prep work was thorough, and the new Pebble Sheen finish looks incredible. Highest recommendation.”

Ryan J. — Stone Oak, San Antonio
★★★★★

“Our 1990s pool was a mess — rough plaster, cracked coping, scaled tile. H&H handled everything in one project. One drain, one crew, one point of contact. Total transformation.”

Stacy D. — Alamo Heights, San Antonio
★★★★★

“Couldn’t believe the difference after the quartz resurfacing. They took the time to explain San Antonio’s hard water chemistry and gave us a startup protocol that kept the finish looking perfect.”

Sherri H. — Helotes, TX

All San Antonio Pool Services

Every aspect of pool interior renovation under one roof — from a simple replaster to a complete pool transformation.

Pool Plastering San Antonio TX

Pool Plastering

Certified replastering in white plaster, quartz, and Pebble Tec for San Antonio’s hard water environment.

Learn more →
Pool Resurfacing San Antonio TX

Pool Resurfacing

Complete interior resurfacing from standard plaster to 20-year pebble aggregate finishes.

Learn more →
Pool Tile San Antonio TX

Pool Tile

Waterline tile replacement, full retiling, and step tile in ceramic, glass, travertine, and limestone.

Learn more →
Pool Renovation San Antonio TX

Pool Renovation

Complete interior renovation packages — one drain, one crew, one point of contact.

Learn more →
Pool Coping San Antonio TX

Pool Coping

Coping repair and replacement in travertine, limestone, brick, and concrete for San Antonio’s clay soils.

Learn more →
Pool Leak Detection San Antonio TX

Pool Leak Detection

Systematic leak diagnosis and structural repair before investing in surface work.

Learn more →

San Antonio Pool Service Area

H&H Tile & Plaster serves homeowners throughout San Antonio, Bexar County, and the greater Hill Country corridor.

Pool Resurfacing in San Antonio — Frequently Asked Questions

Answers to the most common questions San Antonio homeowners ask about pool resurfacing.

If the surface deterioration is widespread — rough areas across most of the pool floor, pitting across multiple surfaces, staining that covers large areas — resurfacing is the appropriate solution. Spot repairs on a deteriorated plaster surface rarely last or look good. If damage is isolated to one area and the overall surface is sound, targeted repair may be appropriate. H&H will give you an honest assessment.

Replastering specifically refers to applying new plaster to the pool interior. Resurfacing is the broader term that includes replastering but also covers applying non-plaster finishes like quartz aggregate or pebble systems. H&H uses the terms interchangeably for projects that involve full removal and replacement of the interior surface.

From drain to fill, most San Antonio resurfacing projects take 3–5 days of active work depending on pool size. After filling, a 28-day chemical startup and cure period follows before the pool can be used normally. Most homeowners plan resurfacing for fall or winter to minimize impact on their swimming season.

Yes, and this is critically important in San Antonio's hard water environment. The first 28 days after a new finish is applied require a specific startup chemistry protocol — balancing pH, calcium hardness, alkalinity, and cyanuric acid on a schedule — to allow the finish to cure properly. H&H provides detailed San Antonio-specific startup instructions to every customer. Shortcuts in this phase are one of the leading causes of premature finish failure.

Partial resurfacing is technically possible but is almost never recommended. New and old plaster cure at different rates and to different colors, making the seam visible and creating a potential delamination point. The cost difference between a full and partial resurface is usually modest enough that a full resurface is almost always the better investment.

Schedule Your San Antonio Pool Resurfacing Estimate

H&H Tile & Plaster serves homeowners throughout San Antonio and Bexar County. Free on-site estimates. Honest recommendations. Certified applicators for all major finish systems.

H&H Tile & Plaster — Licensed & Insured — Certified Applicators — San Antonio, TX